A reliable pond pump is essential for a healthy and enjoyable pond.
This pump should be able to pump you water features to desired levels without too much loss of head pressure (power).Along with your filters (including
Pond bog filters) &
UV Sterilizer, it is essential to provide adequate circulation.
This is where the
Rio HF Pumps (By Taam) are often a good fit.A Rio 32 HF can be used for ponds up to 3500 gallons by themselves for low-medium bio load conditions or in multiples for larger ponds or higher bio loads.
The 20 HF and 26 HF are excellent for ponds under 3500 gallons or as a supplementary water pump for larger ponds.
Here are just a few attributes:• Sealed Vortex Rotor Blade
• High Flow Rate, especially for deep/high water features
• More Gallons flow per watt power
• Fully Submersible
• Energy efficient design
• Rare Earth Magnet
• Multi Purpose; Ideal for high flow, high pressure Ponds as well as Salt/Freshwater Aquariums
• Titanium Shaft with Ceramic Bearing
Suggestions:Make sure to keep this or any
water pump clean and debris free; filtering pond water through a simple bed of gravel/rock can often due the trick, although products such as
Pond Matrix can help with bio filtration at the same time.
As well make sure you change the
UV Bulb on your
pond UV Sterilizer/Clarifier every six months for climates that generally never dip below 40F and once per year in colder climates.This will ensure a clear and enjoyable pond!
